Sierra AirCard 880E and Mandriva Linux

As you probably already learned from a previous post, I’ve switched to Mandriva from my previous FedoraCore distro, running on my home PC and my old ThinkPad T42 notebook.

Recently, I’ve signed up with Cellcom, an Israeli cellular provider for data connection only. I’ve received a Sierra AirCard 880E, which installs easily on Windows and on MacOSX, however, Linux was a little tricky. While reading several sources around the internet, dealing mainly with some shell based scripts – Mandriva is different – simply requires a bit to know the Mandriva framework in order to get it working right.

Step 1: Know where your AirCard is

As the AirCard is inserted to the computer, Mandriva will automatically load the respected kernel module and will automatically assign the /dev/ttyUSB0 device to it.

Step 2: Mandriva Control Center

In the Mandriva control center, launch the network configuartion tool for creating a new connection. Here’s the trick, you need to create a “POTS” connection, not a 3G/EDGE connection. The reason is that the EDGE/3G functionality is maintained by the AirCard itself, Linux has nothing to do it.

Step 3: Configure your connection

I named my connection as Cellcom and setup the following as my dial-in number: *99# – this is very important. Select PAP/CHAP as your login type and set both the username and password to be “cellcom”.

From this point onwards, you should be just fine and up on the network in no time 🙂

Leave a Reply